Authors:
M.I. Abu Mahadi,A.S. Markovich,K.S. Akifyeva,D.A.Miloserdova,DOI NO:
https://doi.org/10.26782/jmcms.2019.03.00039Keywords:
Method of Limiting Equilibrium,Theory of Concrete Deformation,Physical Nonlinearity,Finite Element Method,Bending Elements,Abstract
As the main method of calculating reinforced concrete structures for strength the modern Russian standards have been using the method of limiting equilibrium, which contains some contradictions. In recent years, a discussion has been developing on the transition to the deformation model of the resistance of reinforced concrete used by European code. However, there are a limited number of studies confirming the consistency of the proposed deformation model. We calculated the deformation of a slab on the basis of the Russian standards for theoretical and deformational model. The calculation was carried out by the finite element method using the model of nonlinear deformation of concrete. Then the analysis of the obtained results and their comparison with the results of calculation according to the theoretical provisions of the norms were performed.Refference:
I.Agapov V.P. (2004). Finite Element Method in Static, Dynamics and Stability of Structures. Textbook. 2nd, Edition. Publishing House of Educational Civil Engineering Institutions, Moscow,Russia.
II.Agapov V.P. (2007). Nonlinear static and buckling analysis of thin plates and shells by finite element method. International Journal for Computational Civil and Structural Engineering, 3(2): 13-19. Available online at https://elibrary.ru/item.asp?id=14865508.
III.Agapov V.P., Bardysheva Y.A., Minakov S.A. (2010). Accounting for physical and geometric nonlinearity in the calculation of reinforced concrete slabs and shells of variable thickness by the finite element method. Construction mechanics and calculation of structures, 5: 62-66. Available online at https://elibrary.ru/item.asp?id=15404290.
IV.Benin A.V., Semenov A.S., Semenov S.G., Fedorov I.V. (2011). Finite element modeling of the processes of inelastic deformation and fracture of elements of reinforced concrete structures. Marine intelligent technologies, 3 (13): 102-105. Available online at https://elibrary.ru/item.asp?id=19129788.
V.Code of Practice 52-101-2003. (2005). Manual for the design of concrete and reinforced concrete structures from heavy concrete without prestressing of reinforcement. The Research Center of Construction, Moscow, Russia.
VI.Code of Practice 52-103-2007 (2007). Concrete monolithic building structures. The Research Center of Construction, Moscow, Russia.
VII.Code of Practice 63.13330.2012. (2013). Concrete and reinforced concrete structures. Design requirements. The Research Center of Construction, Moscow, Russia.
VIII.Gorodetskij D.A., Barabash M.S., Vodopyanov R.Y., Titok V.P., Artamonova A.E. (2013). The program complex LIRA-SAPR 2013. Textbook. Edited Gorodetskij A.S.. Electronic edition, Moscow. Available online at https://www.liraland.ru/files/lira2013/#start.
IX.Gvozdev A.A. (1949). Calculation of load-bearing capacity of structures by the method of limiting equilibrium. State Publishing House of Literature on Construction, Architecture and Building Materials, Moscow, USSR.
X.Murashev V.I. (1938). Calculation of reinforced concrete elements by the stage of destruction. State Publishing House of Literature on Construction, Architecture and Building Materials, Moscow-Leningrad, USSR.
XI.Sanzarovskij R.S. (2012). Mistakes of the standards for the design of reinforced concrete. Structural Mechanics of Engineering Constructions and Buildings, 3: 57-65. Available online at https://elibrary.ru/item.asp?id=17770136.
XII.Sanzarovskij R.S., Musabaev T.T. (2014). About non-compliance the Eurocode and the standard for the design of concrete and reinforced concrete structures. Collection of concrete and reinforced concrete –looking into the future of scientific works III All-Russian (II International) Conference on concrete and reinforced concrete in 7 volumes: 448-458. Available online at https://elibrary.ru/item.asp?id=23860341.
XIII.Sanzharovskij R.S, Manchenko M.M. (2017). Errors of international standards on reinforced concrete and rules of the Eurocode. Structural Mechanics of Engineering Constructions and Buildings, 6: 25-36. Available online at https://elibrary.ru/item.asp?id=30507142.
XIV.Starchous I.V., Burtsev V.M. (2016). Calculation of flexible reinforced concrete elements by strength of normal sections with the use of a deformation model. Russian Far East: problems of development of the architectural and construction complex, 1 :449-452. Available online at https://elibrary.ru/item.asp?id=28140531.
XV.Zalesov A.S, Pashchanin A.A. (2011). Calculation of the strength of reinforced concrete beams with the use of volumetric finite elements in the development of standards for the design of reinforced concrete structures. Construction mechanics and calculation of structures, 4: 66-71. Available online at https://elibrary.ru/item.asp?id=16545574.
XVI.Zvezdov A.I, Sanzharovskij R.S, Rybnov E.I. (2012). On national standards for reinforced concrete and ways to improve them. Concrete and reinforced concrete, 2: 19-20. Available online at https://elibrary.ru/item.asp?id=26479132.
View | Download