Authors:
Anitha Sampthkumar,S. Prakash,S. P. Vijayaragavan,DOI NO:
https://doi.org/10.26782/jmcms.spl.2019.08.00061Keywords:
Hybrid-Electric vehicle,PHEV,SRM,On-Board Charger,Abstract
An electric vehicle is known for movable storage batteries, and emerging technology. Plug-in hybrid electric vehicle (PHEV) can extract strength from either chemical fuels or stored electricity, wherein the latter is normally regenerated by using plugging into the electrical grid. PHEV era presents an effective answer for accomplishing better gasoline economy, higher performance, and decrease emissions, compared with traditional automobiles. In PHEV system, on-board charger plays a major role in new trend of fast charging technique. This can be achieved with participating the charger with the converter or assimilating the charger with the motor drive. Integration of driving/charging modes by various controlling converter were employed. This paper deals with series plug in hybrid vehicle controlled by closed-loop control which is being used in switched reluctance motor (SRM). SRM has mounting interest in electrified automobiles due to fantastic overall performance and has been regarded as a low-value system. It has focused windings on the stator and no magnetic foundation at the rotor. Owed to the higher torque-production competence with decrease undulation in torque, an SRM with a higher quantity of stator and rotor poles is an ability applicant for purchase packages in plug-in hybrid electric powered automobiles. In this proposed gadget, the electrical strength drift in the drivetrain is meticulous by means of an electricity electronic converter with less power substituting devices and the operation of the machines levels is unbiased. It lets in the preferred power adaptationamongthe SR motor,the engine generator, and the batteryunder distinctive operation modes. The paper focuses on the layout and implementation of 3 phase switched disinclination motor force with combined charging characteristic all through riding mode of plug in hybrid electric automobile. During driving mode, the excitation interval, driving interval and charging interval were obtained by varying commutation angle with reference to rotor position. For this operation new energy efficient converter is derived to reduce voltage across each phase windings were analyzed and simulated. Simulation consequences primarily based on MATLAB or Simulink demonstrate the efficiency of the motor drive for automobile application and also enhance the market adoption of PHEV.Refference:
I. BerkerBilgin, Ali Emadi, and Krishnamurthy M. (2012), ‘Design considerations
for switched reluctance machines with a higher number of rotor poles’,IEEE
Trans. Ind. Electron., vol. 59, no. 10, pp3. 3745-3756.
II. Bin Gu, Jih-Sheng Lai, Nathan kees and Cong zheng (2013), ‘Hybrid-switching
full-bridge dc–dc converter with minimal voltage stress of bridge rectifier,
reduced circulating losses, and filter requirement for electric vehicle battery
chargers’, IEEE Trans. Power Electron., vol. 28, no. 3.
III. Chang H.C. And Liaw C.M. (2011), ‘An integrated driving/charging switched
reluctance motor drive using three-phase power module’, IEEE Trans. Ind.
Electron., vol. 58, no. 5, pp. 1763–1775.
IV. ChangH.C. and LiawC.M. (2009), ‘Development of a compact switched
reluctance motor drive for EV propulsion with voltage-boosting and PFC
charging capabilities’,IEEE Trans. Veh. Technol., vol. 58, no. 7, pp. 3198–3215.
V. Chun Gan, Yihua Hu, Jianhua Wu, Shiyou Yang, Weaping Cao, and Josep.M
Guerrero (2016), ‘New integrated multilevel converter for switched reluctance
motor drives in plug-in hybrid electric vehicles with flexible energy conversion’,
IEEE Trans. Power Electron (not yet published).
VI. Hongfei W, Peng X, Haibing H, Zihu Z and Andx. Yan (2014), ‘Multiport
converters based on integration of full-bridge and bidirectional dc/dc topologies
for renewable generation systems,” IEEE Trans. Ind. Electron., vol. 61, no. 2, pp.
856–869.
VII. Jianing Liang, Dong-Hee Lee, Guoging Xu and Jin-Woo Ahn(2010), ‘Analysis
of passive boost power converter for three-phase SR drive’, IEEE Trans. Ind.
Electron., vol. 57, no. 9.
VIII. Jr-Jia He, Kai-Wei Hu and Chang-Ming Liaw (2015), ‘An EV SRM drive
powered by battery/supercapacitor with G2V and V2H/V2G capabilities’, IEEE
Trans. Ind. Electron., vol. 62, no. 8.
IX. Katsuhiko Urase, Noboru Yabu, KyoheiKiyota, Hiroya Sugimoto, Akira Chiba
and Masatsugu Takemoto(2015), ‘Energy efficiency of SR and IPM generators
for hybrid electric vehicle’, IEEE Trans. Ind. Appl., vol. 51, no. 4.
X. KhanM. A, Husain I andSozerY. (2013), ‘Integrated electric motor drive and
power electronics for bidirectional power flow between the electric vehicle and
dc or ac grid,’ IEEE Trans. Power Electron., vol. 28, no. 12, pp. 5774– 5783.
XI. Kim H, Kim M. Y and Moon G.W. (2013), ‘A modularized charge equalizer
using a battery monitoring IC for series-connected li-ion battery strings in
electric vehicles’, IEEE Trans. Power Electron., vol. 28, no. 8, pp. 3779–3787.