Authors:
Hasan Jumaah Mrayeh,Ali Nassir Huseen Al- Huseeny,Ali Samir A.,Abdulrahman Hamid,DOI NO:
https://doi.org/10.26782/jmcms.2025.03.00012Keywords:
Adjustable Standing Desk,Ergonomic Design,Mathematical Modeling,Stability Analysis,Design Optimization,Solid Work Modeling,Abstract
This study addresses the Ergonomic challenges faced by individuals working from home due to insufficiently supportive furniture, which contributes to discomfort, poor posture, and health complications. The aim was to develop a cost-effective, adjustable standing desk design that enhances user comfort by increasing height and workspace area while ensuring stability, postural support, and health benefits. A mathematical modeling approach was employed to analyze the stability, strength, and functional performance of the standing desk. The design specifications included achieving a height of at least 45 cm, a workspace area of 4000 cm2 or greater, and sufficient stability to support 50 pounds of weight, all while maintaining a total cost below $250. Several conceptual designs were considered using a decision-making matrix, with the final design developed using SolidWorks software to model key mechanical components. The model was verified using numerical analysis, including torque calculations for stability assessment. The final design achieved a maximum height of 50.64 cm and a workspace area of 7600 cm2, both exceeding the specified requirements. Stability was verified through torque calculations at the points of structural support, demonstrating that the design could counteract applied forces effectively. An assessment of aesthetic appeal, based on a user survey, indicated an 87% satisfaction rate. The total estimated cost $173.4 met the budgetary constraint, leaving room for additional manufacturing expenses. The results demonstrate that the proposed adjustable standing desk meets all functional, non-functional, and cost constraints, offering a viable ergonomic solution for home office settings. Recommendations are provided for improving use convenience and manufacturability in potential future production stages.Refference:
I. Alloy, Iron. Marketfrom.com, 2020, https://www.makeitfrom.com/material-properties/ASTM-A210-Medium-Carbon-Steel.
II. Alloy, Iron. Marketfrom.com, 30 May 2020, https://www.makeitfrom.com/material-properties/AISI-304-S30400-Stainless-Steel.
III. Aluminum, Alloy of. Marketfrom.com, n.d., https://www.makeitfrom.com/material-properties/3003-AlMn1Cu-3.0517-A93003-Aluminum.
IV. Barcellos, Ekaterina Emmanuil Inglesis, and Galdenoro Botura. “Design Process: Metodologia De Interação Entre Design E Engenharia Como Vetor De Inovação.” Blucher Design Proceedings, vol. 2, no. 9, 2016, pp. 1307-1317. 10.11606/gtp.v14i2.137709
V. Chrisman, et al. “Assessing Sitting and Standing in College Students Using Height-Adjustable Desks.” Health Education Journal, vol. 9, no. 6, 2020, pp. 735-744. 10.1177/0017896920901837
VI. Fariz, Nuthqy, et al. “Analysis of Stress and Deformation in Parametric Furniture Using the Finite Element Method.” E3S Web of Conferences, vol. 465, 2023. 10.1051/e3sconf/202346502032
VII. Engineered IT Inc. “Furniture and Related Product Manufacturing.” Haz-Map, n.d., https://haz-map.com/Industries/2034.
VIII. Jafarvand, Mojtaba, et al. “Redesign and Fabrication of a Folding Ergonomic Laptop Desk for College Students.” Journal of Health Sciences & Surveillance System, vol. 10, no. 4, 2022, pp. 471-479. 10.30476/jhsss.2021.92035.1294
IX. Loredan, Nastja Podrekar, et al. “Ergonomic Evaluation of School Furniture in Slovenia: From Primary School to University.” Work, vol. 73, no. 1, 2022, pp. 229-245. DOI:10.3233/WOR-210487
X. Marketfrom.com. “Wood Based Material.” Marketfrom.com, 30 May 2020, https://www.makeitfrom.com/material-properties/Bamboo-Plywood.
XI. “Material Properties: Price of Medium Carbon Steel.” Material Properties, 2020, https://material-properties.org/what-is-price-of-medium-carbon-steel-definition.
XII. Providence. “Working from Home and Lower Back Pain: Ergonomics and Exercise to the Rescue.” Providence Blog, 6 Nov. 2020, https://blog.providence.org/blog/working-from-home-and-lower-back-pain-ergonomics-and-exercise-to-the-rescue.
XIII. Robertson, Michelle M., and Michael J. O’Neill. “Reducing Musculoskeletal Discomfort: Effects of an Office Ergonomics Workplace and Training Intervention.” International Journal of Occupational Safety and Ergonomics, vol. 9, no. 4, 2003, pp. 491-502. 10.1080/10803548.2003.11076585
XIV. Sai Tarun Reddy, and C. H. Patel. “Optimized Design, Analysis of Affordable Height-Adjustable Table.” JETIR, vol. 8, no. 5, 2021, https://www.jetir.org/papers/JETIR2105109.pdf.
XV. Openshaw, Scott, Erin Taylor, and Allsteel. Ergonomics and Design: A Reference Guide. Allsteel Inc., 2006. https://ehs.oregonstate.edu/sites/ehs.oregonstate.edu/files/pdf/ergo/ergonomicsanddesignreferenceguidewhitepaper.pdf
XVI. Engineering Toolbox. “Wood Panel and Structure Timber Products.” Engineering Toolbox, n.d., https://www.engineeringtoolbox.com/timber-mechanical-properties-d_1789.html.
XVII. Verbeek, J. “The Use of Adjustable Furniture: Evaluation of an Instruction Programme for Office Workers.” Applied Ergonomics, vol. 22, no. 3, 1991, pp. 179-184. 10.1016/0003-6870(91)90157-d
XVIII. Viggiani, et al. “Multifunctional Home Office Desk Design for Small Residential Environments.” Revista de Ciencia y Tecnología, 2024, pp. 35-44. 10.36995/j.recyt.2024.41.005
XIX. Vermont Wood Studios. “Wood Maple: Color, Grain & Other Characteristics.” Vermont Wood Studios, n.d., https://vermontwoodsstudios.com/content/maple-wood.