Authors:
Didar Meiramov,Huynjin Ju,Hae-Chang Cho,DOI NO:
https://doi.org/10.26782/jmcms.2025.03.00003Keywords:
Correlation,Cracking,Crack propagation,Digital image,Experiment,Reinforced concrete.,Abstract
The evaluation of cracking and displacement in reinforced concrete beams is critical for assessing structural performance and stiffness during service. The effectiveness of the digital image correlation (DIC) method was investigated for evaluating cracks and displacements in reinforced concrete beams. The beams had varying reinforcement ratios and concrete covers as key parameters. Specimens were tested under two-point loading, and the results were recorded using traditional measurement instruments. These results were then compared with the DIC results. The findings demonstrate that the DIC method accurately determines midspan deflection, with a minor error of 2.33% compared to traditional measuring instruments. However, the accuracy of crack width measurements varied due to elastic deformation, with errors ranging from 7.41% to 68% compared to those obtained by crack detectors. These results demonstrate the potential of the DIC method as a reliable tool for detailed analysis of cracking and deformation in reinforced concrete structures, though further refinement may be required for crack width assessment.Refference:
I. Aris, A., Messa, R., Yuki, O., and Hibino, Y:’Application of Digital Image Correlation Method in RC and FRC Beams Under Bending Test’. Geomate Journal. vol. 24(101), pp:118–125,203. 10.21660/2023.101.g12275
II. Bažant, Z. P., and Cedolin, L. ‘Fracture Mechanics of Reinforced Concrete’. Journal of the Engineering Mechanics Division. vol. 106(6), pp: 1287–1306,1980. 10.1061/JMCEA3.0002665
III. Bažant, Z. P., and Oh, B. H.:’Spacing of Cracks in Reinforced Concrete’.Journal of Structural Engineering. vol. 109(9), pp. 2066–2085,1983. 10.1061/(ASCE)0733-9445(1983)109:9(2066)
IV. IV. Blaber, J. A., Adair, B., and Antoniou, A.: ‘Ncorr: Open-Source 2D Digital Image Correlation MATLAB Software’. Experimental Mechanics, vol. 55, pp:1105–1122,2015. 10.1007/s11340-015-0009-1
V. Ding, Y. : ‘Investigations into the Relationship Between Deflection and Crack Mouth Opening Displacement of SFRC Beam’.Construction and Building Materials, vol. 25(5),pp:2432–2440,2011. 10.1016/j.conbuildmat.2010.11.055
VI. Fayyad, T. M., and Lees, J. M., ‘Experimental Investigation of Crack Propagation and Crack Branching in Lightly Reinforced Concrete Beams Using Digital Image Correlation’. Engineering Fracture Mechanics, vol. 182, pp: 487–505,2017. 10.1016/j.engfracmech.2017.04.051
VII. Gali, S., and Subramaniam, K. V. L.: ‘Shear Behavior of Slender and Non-Slender Steel Fiber-Reinforced Concrete Beams’. ACI Structural Journal, vol. 116, p. 149,2019.10.14359/51713307
VIII. Gupta, A. K., and Akbar, H. “Cracking in Reinforced Concrete Analysis’. Journal of Structural Engineering. vol. 110(8),pp. 1735–1746,1984. 10.1061/(ASCE)0733-9445(1984)110:8(1735)
IX. Huang, Y., He, X., Wang, Q., and Xiao, J. ‘Deformation Field and Crack Analyses of Concrete Using Digital Image Correlation Method’.Frontiers of Structural and Civil Engineering. vol. 13(5),pp: 1183–1199,2019. 10.1007/s11709-019-0545-3
X. Kammers, A. D., and Daly, S., ‘Small-Scale Patterning Methods for Digital Image Correlation Under Scanning Electron Microscopy’. Measurement Science and Technology.vol. 22(12), p. 125,20111. 10.1088/0957-0233/22/12/125501
XI. Lacidogna, G., Piana, G., Accornero, F., and Carpinteri, A., ‘Multi-Technique Damage Monitoring of Concrete Beams: Acoustic Emission, Digital Image Correlation, Dynamic Identification’. Construction and Building Materials. vol. 242, p. 118114, 2020. 10.1016/j.conbuildmat.2020.118114
XII. Lee, H.-M., and Yoo, K.-S., ‘A Study on the Metabus-Based Equipment Monitoring System’The Korean Innovation Industry Society. vol. 1(3), pp. 99–105,2023.10.60032/JIIT.2023.1.3.99
XIII. McCormick, N., and Lord, J., ‘Digital Image Correlation for Structural Measurements’. Proceedings of the Institution of Civil Engineers – Civil Engineering, vol. 165(4), 2012, pp. 185–190,2012. 10.1680/cien.11.00040
XIV. Oh, B. H., and Kang, Y. J., ‘New Formulas for Maximum Crack Width and Crack Spacing in Reinforced Concrete Flexural Members.’.ACI Structural Journal. vol. 84, pp: 103–112,1987. 10.14359/2787
XV. Poldon, J. J., Hoult, N. A., and Bentz. E. C., ‘Distributed Sensing in Large Reinforced Concrete Shear Test’. ACI Structural Journal. vol. 116( 5), 2019, pp. 235–245,2019.10.14359/51716765
XVI. Seemab, F., Schmidt, M., Bakhteer, A., Classen, M., and Chudoba, R., ‘Automated Detection of Propagating Cracks in RC Beams Without Shear Reinforcement Based on DIC-Controlled Modeling of Damage Localization’.Engineering Structures. vol. 286, pp: 116–118,2023.10.1016/j.engstruct.2023.116118
XVII. Sindu, B. S., and Saptarshi, S., ‘Multi-Scale Abridged Cement Composite with Enhanced Mechanical Properties’. ACI Materials Journal.vol. 117( 4),2020. 10.14359/51724625
XVIII. Tambusay, A., Suryanto, B., and Suprobo, P., ‘Digital Image Correlation for Cement-Based Materials and Structural Concrete Testing’. Civil Engineering Dimension. vol. 22(1), pp: 6–12,2020.10.9744/ced.22.1.6-12
XIX. Toutanji, H., and Deng, Y., ‘Deflection and Crack-Width Prediction of Concrete Beams Reinforced with Glass FRP Rods’.Construction and Building Materials. vol. 17(1),pp. 69–74,2003.10.1016/S0950-0618(02)00094-6
XX. Verbruggen, S., De Sutter, S., Iliopoulos, S., Aggelis, D.G., and Tysmans, T., ‘Experimental Structural Analysis of Hybrid Composite-Concrete Beams by Digital Image Correlation (DIC) and Acoustic Emission (AE)’. Journal of Nondestructive Evaluation. vol. 35(1), p. 2,2015. 10.1007/s10921-015-0321-9