Authors:
J . Manikandan,M. Sucharitha,D. Surya Ramanjaneyulu,DOI NO:
https://doi.org/10.26782/jmcms.spl.2019.08.00084Keywords:
Friction stir welding,SS Tool,HSS Tool,Magnesium alloy (AZ31B),Abstract
Welding friction, an eco-friendly powerful state bonding method for bonding magnesium alloys, particularly as it is a light metal that is hard to bond using standard techniques. The impact of the tool velocity on the magnesium alloy takes place at distinct speeds Stir welding process during the friction. Further microstructure analyzes are carried out on the welded joint, resulting in the evolution of the microstructure, welding defects and welding tool properties.Refference:
I. R. J. Golden Renjith Nimal, M. Sivakumar, S. Arungalai
Vendan, G. Esakkimuthu. “Chapter 40 Effect of Mechanical
and Metallurgical Analysis of Magnesium and Aluminium
Alloys Using Diffusion Bonding”, Springer Nature, 2018.
II. R. Hariharan and R.J. Golden Renjith Nimal, “Die Design for
Homogeneous Plastic Deformation during ECAP and
Investigation of Mechanical Properties of Pure Aluminum and
Copper Rods”, Middle-East Journal of Scientific Research 14
(12): 1716-1721, 2013
III. R. Hariharan and R.J. Golden Renjith Nimal, “Evaluation of
filling conditions in Injection Moulding by Integrating
Numerical Simulations”, Middle-East Journal of Scientific
Research 12 (12): 1608-1604, 2012
IV. R. Hariharan and R.J. Golden Renjith Nimal, “Experimental
Investigations on Material Characteristics of Al 6061-TiB2
MMC Processed by Stir Casting Route”, Middle-East Journal of
Scientific Research,12(12): 1615-1619,2012
V. R. Hariharan and R.J. Golden Renjith Nimal ,”Friction Stir
Welding of dissimilar aluminum alloys (6061 and 7075) by
using computerized numerical control machine”, Middle East
Journal of Scientific Research, vol 14, issue 12:1752-6,2013
VI. Friction stir welding of magnesium AM60 Alloy/ Naiyi
Li,Tsung-Yu Pan/2014.
VII. Investigation of microstructure on friction stir welded AZ61
magnesium alloy joint/ Kulwant Singh, Gurbhinder Singh,
Harmeet Singh/ 2018.
VIII. V. Jaiganesh, S. Govind Vignesh, S.M. Vignesh.”Investigation
on Micro structural and Mechanical Properties of Friction Stir
Welded AZ91E Mg Alloy”, Materials Today: Proceedings,
2017
IX. R.J. Golden Renjith Nimal, M. Sivakumar, S.Gokul Raj, S.
Arungalai Vendan, G.Esakkimuthu. “Microstructural,
mechanical and metallurgical analysis of Al interlayer coating
on Mg-Al alloy using diffusion bonding”,Materials Today:
Proceedings, 2018
X. S. Ugender, A. Kumar, A. Somi Reddy.”Microstructure and
Mechanical Properties of AZ31B Magnesium Alloy by Friction
Stir Welding”, Procedia Materials Science, 2014.
XI. Paper on Friction stirs welding of Magnesium Alloys-A
Review/V.Prasanna/K.Sarath/2016.
XII. Review on friction stir welding of magnesium alloys/ Kulwant
Singh, Gurbhinder Singh, Harmeet Singh/ 2018.
XIII. “Selection of FSW tool pin profile, shoulder diameter and
material for joining AZ31B magnesium alloy – An
experimental approach”, Materials & Design, 2009.
XIV. R. Hariharan and R.J. Golden Renjith Nimal , “Solving Flow
Shop Scheduling Problems Using a Hybrid Genetic Scatter
Search Algorithm”, Middle-East Journal of Scientific Research
20 (3): 328-333, 2014.