Authors:
Hariharan.R,Raja.R,Golden Renjith Nimal R J,DOI NO:
https://doi.org/10.26782/jmcms.spl.2019.08.00082Keywords:
Ta (DC-100w),Zr (RF-100w),E19 steel,nitrogen,silicon wafer,morphology,tribology,Abstract
(Ta-Zr-N) films was deposited on E19 steel and silicon wafer substrates by RF/DC magnetron sputtering, using Ta(DC-100w), Zr(RF-100w),base.𝑝𝑟 = 4𝑥10 m.bar. deposition 𝑝𝑟 = 2𝑥10m.bar. Air rate of flow 15 sccm, 3 sccm Nitrogen flow. The films were examined by X-ray diffraction to search out that the content of bimetallic components (Ta and Zr) decreases with pressure, as indicated at completely different temperature levels (200˚c, 400˚c) respectively. Films were morphologically tribologically and mechanically characterized using SEM, AFM, Wear, Corrossion, and Nano Indentation.Refference:
I. C-S. Shin, D. Gall, P. Desjardins, A. Vailionis, H. Kim, I. Petrov, J.E. Greene,
M. Odén, Appl. Phys. Lett. 75 (1999) 3808.
II. D. Depla, S. Heirwegh, S. Mahieu, R. De Gryse, J. Phys. D: Appl. Phys. 40
(2007) 1957.
III. G. Abadias, Ph. Guerin, Appl Phys Lett. 93 (2008) 111908.
IV. G.G. Stoney, Proc. R. Soc. Lond. A 82 (1909) 172.
V. “Influence of Deposition on the Mechanical Property Correlation in Al-O
Thin Films with Complex Microstructures by RF Magnetron Sputtering”
R.Hariharan , R.Raja , A.S .Anish , S.Balaji , M.Aswin , J.Roshan,
International Journal of Recent Technology and Engineering (IJRTE) ISSN:
2277-3878, Volume-7 Issue-6S2, April 2019.
VI. “Investigation on Micro Structural, Mechanical and Tribological Properties Of
Aluminium Nitride (ALN) Coating Deposited By RF Magnetron Sputtering”
R.Hariharan ,R.Raja, International Journal of Latest Trends in Engineering
and Technology pp.085-091,2017.
VII. J.-H. Huang, H.-C. Yang, X.-J. Guo, G.-P. Yu, Surf. Coat. Technol. 195
(2005) 204.
VIII. L.E. Koutsokeras, G. Abadias, Ch.E. Lekka, G.M. Matenoglou, D.F.
Anagnostopoulos, G.A. Evangelakis, P. Patsalas, Appl Phys Lett. 93 (2008)
011904.
IX. M. Stueber, H. Holleck, H. Leiste, K. Seemann, S. Ulrich, C. Ziebert, J.
Alloys Compd. 483 (2009) 321–333.
X. M.B. Takeyama, A. Noya, K. Sakanishi, J. Vac. Sci. Technol. B 18 (2000)
1333.
XI. “Mechanical and tribological behaviour of thin TaN coating produced on AISI
1018 substrate by DC magnetron sputtering”, R.Hariharan, R.Raja, Somu.
Vasu, Volume-7 Issue-6S2, April 2019,IJRTE.
XII. P.H. Mayrhofer, C. Mitterer, L. Hultman, H. Clemens, Prog. Mater. Sci. 51
(2006) 1032.
XIII. S. Berg, T. Nyberg, Thin Solid Films 476 (2005) 215.
XIV. S. Noda, K. Tepsanongsuk, Y. Tsuji, Y. Kajikawa, Y. Ogawa, H. Komiyama,
J. Vac. Sci. Technol. A 22 (2004) 332.
XV. S.M. Aouadi, M. Debessai, J. Vac. Sci. Technol. A 22 (2004) 1975.
XVI. “Study of chromium nitrate coating prepared by RF/DC magnetron
sputtering” R.Hariharan , R.Raja , R. Agash Raj, E.A. Agathiyan, D. Deva, P.
Esakki, Volume-7 Issue-6S2, April 2019,IJRTE.