AN OVERVIEW TOWARDS THE TIP-RUBBING EVENT AND USAGE OF ABRADABLE MATERIALS TO MINIMIZE THE OCCURRENCE OF TIP-RUBBING

Authors:

Ch. Vinay Kumar Reddy,I. Rajasri,

DOI NO:

https://doi.org/10.26782/jmcms.2019.06.00049

Keywords:

tip-rubbing,Rolls-Royce Trent 900 engine,Blade-Casing,

Abstract

There has actually been a considerable rise in air traffic quantity, especially over the previous twenty years. In order to handle this boost popular, it has actually been needed to raise the effectiveness of airplane engines. For many years, this has actually been accomplished by minimizing the clearance in between blade tips and also the engine casing. Consequently, of the minimized clearance, tip-rubbing often takes place in the engine throughout the procedure. In this paper, a short intro to the tip-rubbing occasion as well as associated prices to the sector, and also just how abradable products are utilized to decrease the incident of tip-rubbing are pointed out. The Rolls-Royce Trent 900 engine and also the 2nd phase compressor area are explained briefly.

Refference:

I.AircraftAccidentReport–NationalAirlines,Inc.DC-10-10,N60NA,Near
Albuquerque,NewMexico,November3,1973,(1975),NTSB-AAR-75-2,
NationalTransportationSafetyBoard,Washington,D.C.20591.
II.AircraftAccidentReport–In-FlightEngineSeparationJapanAirlines,Inc,
Flight 46e Boeing 747-121, (1993), NTSB/AAR-93/06, National
TransportationSafetyBoard,Washington,D.C.20594.
III.Aidanpää,J.andLindkvist,G.(2010),”DynamicsofaRubbingJeffcottRotor
withThreeBlades”,ProceedingsoftheThirdChaoticModelingandSimulation
InternationalConference,1-4June2010,Chania,Crete,Greece.
IV.AustralianTransportSafetyBureau(2008),In-flightenginefailure,Sydney,
BoeingCompany747-438,VH-OJM,03February2007,200700356.
V.Chu,F.andLu,W.(2007),”Stiffeningeffectoftherotorduringtherotor-to-
statorrubinarotatingmachine”,JournalofSoundandVibration,vol.308,no.
3-5,pp.758-766.
VI.ContactModellinginLS-DYNA-ContactParameters(2001),availableat:http://www.dynasupport.com/tutorial/contact-modeling-in-ls-dyna/contact-parameters (accessed20/09/2011).
VII.Dai,X.,Jin,Z.andZhang,X.(2002),”Dynamicbehaviourofthefullrotor/stoprubbing”,JournalofSoundandVibration,vol.251,no.5,pp.807-822.
VIII.DeRyck,H.(2008),TurbofanDesignfortheCommercialAircraft,Warsaw
University of Technology, Warsaw,Poland.
IX.Dinardo, J. E. (2009), Signal Processing Techniques for Nonlinearity IdentificationofStructuresUsingTransientResponse(MasterofScience thesis),UniversityofMissouri,Missouri,USA.
X.LS-DYNATheoryManual(2006),LivermoreSoftwareTechnology Corporation, Livermore, California94551.
XI. LS-DYNAKeywordUser’sManual(2007),Version971ed.,LivermoreSoftware
Technology Corporation, Livermore, California94551.
XII.Virgin Driver (2010), available at: http://virginflightdeck.blogspot.com/
(accessed11/11/2011).
Ch. Vinay Kumar Reddy, I. Rajasri View Download