Behaviour of Full Scale Reinforced Concrete Beams Strengthened with Textile Reinforced Mortar (TRM)

Authors:

Fawwad Masood,Asad-ur-Rehman Khan,

DOI NO:

https://doi.org/10.26782/jmcms.2019.06.00006

Keywords:

Reinforced concrete,Full scale beams, Strengthening,Textile Reinforced Mortar, Load-Deflection,Performance,

Abstract

With increase in use of fibres for strengthening of Reinforced Concrete (RC) beams, Textile Reinforced Mortar (TRM) is becoming a popular choice among the researchers and scientists. While Carbon, glass and PBO fibers have shown encouraging results for structural strengthening, use of basalt fibres have not been much explored for strengthening other than masonry. Limited small-scale data exists for the use of basalt fibres in TRM strengthening but data for full scale beams is scarce. This paper presents an experimental study of six full scale RC beams tested with a varying shear span to depth (a/d) ratio 3 through 6, where three beams served as control beams for various a/d ratios while the remaining three beams were strengthened with TRM using basalt fibres. TRM was provided at the tension face of the beams for strengthening in flexure along with U-shaped wraps. Results showed that TRM using basalt fibres is effective in improving the performance of RC beams in terms of serviceability, crack and deflection control, load carrying capacity, initial and post cracking stiffness, and ductility.

Refference:

I.ACI. “Guide to design and construction of externally bonded fabric-reinforced cementitious matrix (FRCM) systems for repair and strengthening concrete and masonry structures”,2013.

II.ACI Committee %J American Concrete Institute, F. H., MI. (2014). 318, “Building Code Requirements for Structural Concrete (ACI 318–14) and Commentary (ACI 318R–14). 519”,2014.

III.Al-Salloum, Y. A., Siddiqui, N. A., Elsanadedy, H. M., Abadel, A. A., & Aqel, “Textile-reinforced mortar versus FRP as strengthening material for seismically deficient RC beam-column joints”,Journal of Composites for Construction15(6), 920-933, 2011.

IV.Aljazaeri, Z. R., Janke, M. A., & Myers, “A novel and effective anchorage system for enhancing the flexural capacity of RCbeams strengthened with FRCMcomposites”,Composite Structures, 2018.

V.Ayub, T., Khan, S. U., & Memon, F. Ahmed,(2014).”Mechanical characteristics of hardened concrete with different mineral admixtures: a review”,The Scientific World Journal,2014.

VI.Azam, R., & Soudki, “FRCM strengthening of shear-critical RC beams”,Journal of Composites for Construction,18(5), 04014012, 2014.

VII.Bencardino, F., Spadea, G., Swamy, “The problem of shear in RC beams strengthened with CFRP laminates”, Construcion Building Materials,21(11), 1997-2006, 2007.

VIII.Bisby, L., & Williams, B. J.,”An introduction to FRP strengthening of concrete structures”. 4, 1-39, ISIS Educational Module, 2014.

IX.Bournas, D. A., Lontou, P. V., Papanicolaou, C. G., T.Triantafillou, “Textile-reinforced mortar (TRM) versus FRP confinement in reinforced concrete columns”, ACI Structural Journal104(6), 740-748, 2007.

X.Brückner, A., Ortlepp, R., Curbach, “Textile reinforced concrete for strengthening in bending and shear”, Materials & Structures39(8), 741-748, 2006.

XI.Carloni, C., Subramaniam, K. V., Savoia, M., & Mazzotti, “Experimental determination of FRP–concrete cohesive interface properties under fatigue loading”. 94(4), Composite Structures, 1288-1296, 2012.

XII.D’Antino, T., Carloni, C., Sneed, L., & Pellegrino, “Matrix–fiber bond behavior in PBO FRCM composites: A fracture mechanics approach”, Engineering Fracture Mechanics,117, 94-111, 2014.

XIII.Escrig, C., Gil, L., Bernat-Maso, E., Puigvert, “Experimental and analytical study of reinforced concrete beams shear strengthened with different types of textile-reinforced mortar”, Construction and Building Materials,83, 248-260, 2015.

XIV.Fib builletin:”Externally BondedFRPReinforcement for RC Structures”. (14), 51-58., 2001.

XV.Jiang, C., Fan, K., Wu, F., Chen, “Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete”, Materials & Design58, 187-193, 2014.

XVI.Khan, A., F.Masood, “Strengthening of Reinforced Concrete Beams With Textile Reinforced Mortar (TRM) in Flexure”,8th International Civil Engineering Congress (ICEC-2016), Karachi, Pakistan, 2016.

XVII.Khan, A., F.Masood, “Strengthening of shear deficient reinforced concrete beams with textile reinforced mortar (TRM)”.8th international conference on fibre-reinforced (FRP) composites in civil engineering, Hong Kong, China, 2016.

XVIII.Loreto, G., Babaeidarabad, S., Leardini, L., & Nanni, “RC beams shear-strengthened with fabric-reinforced-cementitious-matrix (FRCM) composite”, International Journal of Advanced Structural Engineering7(4), 341-352, 2015.

XIX.Ma, G., G.Li, “Experimental study of the seismic behavior of predamaged reinforced-concrete columns retrofitted with basalt fiber–reinforced polymer”, Journal of Composites for Construction,19(6), 04015016, 2015.

XX.Ombres, L., Mancuso, N., Mazzuca, S., & Verre, “Bond between Carbon Fabric-Reinforced Cementitious Matrix and Masonry Substrate”, Journal of Materials in Civil Engineering,31(1), 04018356, 2018.

XXI.Ombres, Luciano, “Structural performances of reinforced concrete beams strengthened in shear with a cement based fiber composite material”, Composite Structures,122, 316-329,2015.

XXII.Razaqpur, A. G., Shedid, M., & Isgor, Burkan, “Shear strength of fiber-reinforced polymer reinforced concrete beams subject to unsymmetric loading”, Journal of Composites for Construction,15(4), 500-512, 2010.

XXIII.Rostam, S., Bakker, R., Beeby, A., van Nieuwenburg, D., Schiessl, P., L.Sentler, “Durable Concrete Structures-CEB Design Guide”,Bulletin d’Information(182), 1992 J. Mech. Cont.& Math. Sci., Vol.-14, No.-3, May-June(2019) pp 65-82Copyright reserved © J. Mech. Cont.& Math. Sci.Fawwad Masoodet al.82.

XXIV.Sneed, L., D’Antino, T., Carloni, C., Pellegrino, C., “A comparison of the bond behavior of PBO-FRCM composites determined by double-lap and single-lap shear tests”,Cement and Concrete Composites,64, 37-48, 2015.
XXV.Spadea, G., Bencardino, F., Swamy, R. J. M., “Optimizing the performance characteristics of beams strengthened with bonded CFRP laminates”, Materials and Structures,33(2), 119-126, 2000.
XXVI.Tetta, Z. C., Koutas, L. N., & Bournas, D., “Textile-reinforced mortar (TRM) versus fiber-reinforced polymers (FRP) in shear strengthening of concrete beams”, Composites Part B: Engineering, 77, 338-348, 2015.
XXVII.Tetta, Z. C., Koutas, L. N., & Bournas, D., “Shear strengthening of full-scale RC T-beams using textile-reinforced mortar and textile-based anchors”,Composites Part B: Engineering,95, 225-239, 2016.
XXVIII.Trapko, T., Urbańska, D., & Kamiński, M., “Shear strengthening of reinforced concrete beams with PBO-FRCM composites”, Composites Part B: Engineering,80, 63-72, 2015.
XXIX.Triantafillou, T. C., Papanicolaou, C. G., Zissimopoulos, P., & Laourdekis, T., “Concrete confinement with textile-reinforced mortar jackets”, ACI Materials Jourmal,103(1), 28, 2006.
XXX.Triantafillou, T. C., Papanicolaou, C, “Shear strengthening of reinforced concrete members with textile reinforced mortar (TRM) jackets”, Materials & Structures,39(1), 93-103,2016.
XXXI.Triantafillou, T., “Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites”, ACI Structural Jourmal, 95, 107-115, 1998.
XXXII.Tzoura, E., Triantafillou, T. J. M., & Structures. (2016). “Shear strengthening of reinforced concrete T-beams under cyclic loading with TRM or FRP jackets”, Materials & Structures,49(1-2), 17-28, 2016.
Fawwad Masood, Asad-ur-Rehman Khan View Download