Authors:
Aman Khan,Adil Afrdi,DOI NO:
https://doi.org/10.26782/jmcms.2019.04.00020Keywords:
Municipal Solid Waste,Gasification,aste-to-Energy,Abstract
With an increasing demand for electrical energy, it is certain that the production will also increase, especially in rapid developing countries like Pakistan. Rapid industrialization is carving for more electrical energy, investment and suitable space for its infrastructure. But this development has to be sustainable keeping in mind the increasing global temperature due to pollution. Pakistan is the six largest populations in the world and hence produces a lot of waste daily. As of now, most of the waste goes to the landfills and gets burnt there or decomposed, either way releasing greenhouse gases in the process and degrading the environment. The municipal waste management is a challenging process in developing countries because of non-availability of proper infrastructure. There are some methods to manage this waste, such as scientific landfills, Incineration, Biomethanation, Gasification, Pyrolysis and Plasma Arc Gasification. By gasification the solid waste is converted into synthesis gas which can be used for chemical industries, power generation, transportation and industrial heating etc. This process shrinks the solid waste to slag or ash which can either be used to manufacture eco bricks or can be disposed of on landfill. Thus saving a lot of place from land filling and if used for power generation it does not release any considerable harmful gases into the environment making it a sustainable process and partially renewable source of energy. This project will estimate the cost and procedure to setup gasification plant. In the study, the generation, composition, treatment and energy potential of solid waste have been studied. The technologies for waste-to-energy conversion have also been studied and the feasibility comparison of two leading technologies has been done.Refference:
I.Abbe, O.O., Harvey, C.M., Ikuma, L.H. and Aghazadeh, F., 2011. Modelling the relationship between occupational stressors, psychosocial/physical symptoms and injuries in the construction industry. International Jou
II.Altmann, E., Kellett, P., 1999. Thermal Municipal Solid Waste Gasification. Renewable Energy Information Office, Irish Energy Centre.
III.Aznar, M.P., Gracia-Gorria, F.A., Corella, J., 1998. La velocidad minima defluizacion y de completafluidizacion de mezclas de residuosagrarios y forestales con secundosolidofluidizante. Anales de Quimica 84 (3), 385–394.
IV.Barducci G., 1992. The RDF gasifier of Florentine area (Gre`ve in Chianti Italy). The first Italian-Brazilian symposiumon Sanitary and Environmental Engineering.
V.Barducci P., Neri G., 1997. An IGCC plant in Italy for power generation from biomass. Bioelettrica Internal Report.
VI.Barducci, P., Neri, G., Trebbi, G., 1997. The Energy Farm Project. World Gas Conference, Copenhagen.
VII.Baykara, S.Z., Bilgen, E., 1981. A Feasibility Study on Solar Gasification of Albertan Coal. Alternative Energy Sources IV, vol. VI. Ann Arbor Science, New York.
VIII.Becker, B., Schetter, B., 1992. Gas turbine above 150 MW for integrated coal gasification combined cycles (IGCC). Journal of Engineering for Gas Turbines and Power 114, 660–664. Bingyan, X., Zengfan, L., Chungzhi, W., Haitao, H., Xiguang, Z., 1994. Circulating Fluidized Bed Gasifier for Biomass. Integrated Energy Systems in China. The cold Northeastern Region Experience FAO. FAO.
IX.De Lange, H.J., Barducci, P., 2000. The realization of a biomass-fuelled IGCC plant in Italy. In: European Congress on Biomass TEF.
X.Delgado, J., Aznar, M.P., Corella, J., 1996. Calcined dolomite, magnesite, and calcite for cleaning hot gas from a fluidized bed biomass gasifier with steam: life and usefulness. Industrial & Engineering Chemistry Research 35 (10), 3637–3643.
Aman Khan, Adil Afrdi View Download