THE PERFORMANCE OF Al2 O3 Crude Oil ON NONLINEAR STRETCHING SHEET

Authors:

MOHAMMED M. Fayyadh,R. Kandasamy,RADIAH Mohammed,JAAFARAbdul Abbas Abbood,

DOI NO:

https://doi.org/10.26782/jmcms.2018.12.00021

Keywords:

MHD Carreau mode,crude oil-AL2O3,nanoparticle shapes,

Abstract

Nanotechnology has enticed a good attention in boosting base fluid such as crude oil. A mathematical model is investigated to study MHD Carreau crude oil based nanofluids. Analysis over stretching sheet surface is illustrated that include consideration of nanoparticles shape with high (E1=5.0) and low (E1=0.0) electric field. Depending on nanoparticle shape, deferent expects of nanofluids flow such that the shapes as (sphere, cylinder, lamina) to boost the heat and mass transfer. Employing convenient self-similar transformation, the set of partial differential equation converted to dimensionless system. These equations has numerically solution by apply Runge-Kutta Fehlberg form plus so-called shooting technique and solving algebraically in Maple 18. Effect of relevant parameters on all concerned profile are incurred to examine the heat and mass transfer properties. For thermal radiation and heat generation parameters the profiles are on negative worth of temperature, is seen in the out of boundary region all these physical behaviours are due to the combined effects of the viscosity and density of the crude oil. The result obtained that heat generation, Brownian motion and magnetic field hit a dominant role on  Al<sub>2</sub> O<sub>3</sub> Crude Oil. The investigation revealed that there is no important role for nanoparticle shapes on Al<sub>2</sub> O<sub>3</sub> Crude Oil.

Refference:

I.B. M’hamed,N. A. C. Sidik, M. N. A. W. M. Yazid, R. Mamat, G. Najafi, and G. H. R. Kefayati, ―A review on why researchers apply external magnetic field on nanofluids,‖ Int. Commun. Heat Mass Transf., vol. 78, pp. 60–67, 2016.

II.B. A. Suleimanov, F. S. Ismailov, and E. F. Veliyev, ―Nanofluid for enhanced oil recovery,‖ J. Pet. Sci. Eng., vol. 78, no. 2, pp. 431–437, 2011.

III.C. Negin, S. Ali, and Q. Xie, ―Application of nanotechnology for enhancing oil recovery–A review,‖ Petroleum, vol. 2, no. 4, pp. 324–333, 2016.

IV.D. Han, W. F. He, and F. Z. Asif, ―Experimental study of heat transfer enhancement using nanofluid in double tube heat exchanger,‖ Energy Procedia, vol. 142, pp. 2547–2553, 2017.

V.E. A. Taborda, C. A. Franco, S. H. Lopera, V. Alvarado, and F. B. Cortés, ―Effect of nanoparticles/nanofluids on the rheology of heavy crude oil and its mobility on porous media at reservoir conditions,‖ Fuel, vol. 184, pp. 222–232, 2016.

VI.J. Taheri-Shakib, A. Shekarifard, and H. Naderi, ―Heavy crude oil upgrading using nanoparticlesby applying electromagnetic technique,‖ Fuel, vol. 232, pp. 704–711, 2018.

VII.J. Y. Jang, M. M. Khonsari, and S. Bair, ―On the elastohydrodynamic analysis of shear-thinning fluids,‖ in Proceedings of the Royal Society of London A: Mathematical, Physical andEngineering Sciences, 2007, vol. 463, no. 2088, pp. 3271–3290.

VIII.M. Khan and A. Hafeez, ―A review on slip-flow and heat transfer performance of nanofluids from a permeable shrinking surface with thermal radiation: dual solutions,‖ Chem. Eng. Sci., vol. 173, pp. 1–11, 2017.

IX.M. Khan, ―A revised model to analyze the heat and mass transfer mechanisms in the flow of Carreau nanofluids,‖ Int. J. Heat Mass Transf., vol. 103, pp. 291–297, 2016.

X.M. Khan, M. Y. Malik, T. Salahuddin, and I. Khan, ―Numerical modelingof Carreau fluid due to variable thicked surface,‖ Results Phys., vol. 7, pp. 2384–2390, 2017.

XI.M. Azam, M. Khan, and A. S. Alshomrani, ―Effects of magnetic field and partial slip on unsteady axisymmetric flow of Carreau nanofluid over a radially stretching surface,‖ Results Phys., vol. 7, pp. 2671–2682, 2017.

XII.M. Khan, M. Y. Malik, and T. Salahuddin, ―Heat generation and solar radiation effects on Carreau nanofluid over a stretching sheet with variable thickness: Using coefficients improved by Cash and Carp,‖ Results Phys., vol. 7, pp. 2512–2519, 2017.

XIII.N. A. Ogolo, O. A. Olafuyi, and M. O. Onyekonwu, ―Enhanced oil recovery using nanoparticles,‖ in SPE Saudi Arabia section technical symposium and exhibition, 2012.

XIV.N. S. Akbar, S. Nadeem, R. U. Haq, and Z.H. Khan, ―Numerical solutions of Magnetohydrodynamic boundary layer flow of tangent hyperbolic fluid towards a stretching sheet,‖ Indian J. Phys., vol. 87, no. 11, pp. 1121–1124, 2013.

XV.N. Krishnan and B. S. Kumar, ―INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY REVIEW ON SHELL AND TUBE HEAT EXCHANGER USING NANOFLUIDS.‖

XVI.N. S. Akbar, S. Nadeem, R. U. Haq, and Z. H. Khan, ―Radiation effects on MHD stagnation point flow of nano fluid towards a stretching surface with convective boundary condition,‖ chinese J. Aeronaut., vol. 26, no. 6, pp. 1389–1397, 2013.

XVII.R. Tao and X. Xu, ―Reducing the viscosity of crude oil by pulsed electric or magnetic field,‖ Energy & fuels, vol. 20, no. 5, pp. 2046–2051, 2006.

XVIII.R. Kandasamy, N. A. bt Adnan, and R. Mohammad, ―Nanoparticle shape effects on squeezed MHD flow of water based Cu, Al2O3 and SWCNTs over a porous sensor surface,‖ Alexandria Eng. J., 2017.

XIX.R. Mohammad and R. Kandasamy, ―Nanoparticle shapes on electric and magnetic force in water, ethylene glycol and engine oil based Cu, Al2O3 and SWCNTs,‖ J. Mol. Liq., vol. 237, pp. 54–64, 2017.

XX.R. Dharmalingam, R. Kandasamy, and K. K. Sivagnana Prabhu, ―Lorentz forces and nanoparticle shape on water based Cu, Al2O3 and SWCNTs,‖ J. Mol. Liq., vol. 231, pp.663–672, 2017.

XXI.S. K. Das, S. U. S. Choi, and H. E. Patel, ―Heat transfer in nanofluids—a review,‖ Heat Transf. Eng., vol. 27, no. 10, pp. 3–19, 2006.

XXII.S. Z. Heris, M. N. Esfahany, and S. G. Etemad, ―Experimental investigation of convective heat transfer of Al2O3/water nanofluid in circular tube,‖ Int. J. Heat Fluid Flow, vol. 28, no. 2, pp. 203–210, 2007.

XXIII.T. Hayat, S. Asad, M. Mustafa, and A. Alsaedi, ―Boundary layer flow of Carreau fluid over a convectively heated stretching sheet,‖ Appl. Math. Comput.,vol. 246, pp. 12–22, 2014.

XXIV.T. Hayat, M. Z. Kiyani, I. Ahmad, and B. Ahmad, ―On analysis of magneto Maxwell nano-material by surface with variable thickness,‖ Int. J. Mech. Sci., vol. 131, pp. 1016–1025, 2017.

XXV.T. Fang, J. Zhang, and Y. Zhong, ―Boundary layer flow over a stretching sheet with variable thickness,‖ Appl. Math. Comput., vol. 218, no. 13, pp. 7241–7252, 2012.

XXVI.W. A. Khan and I. Pop, ―Boundary-layer flow of a nanofluid past a stretching sheet,‖ Int. J. Heat Mass Transf., vol. 53, no. 11–12, pp.2477–2483, 2010.

XXVII.W. Ibrahim, ―Magnetohydrodynamic (MHD) boundary layer stagnation point flow and heat transfer of a nanofluid past a stretching sheet with melting,‖ Propuls. Power Res., vol. 6, no. 3, pp. 214–222, 2017.

Author(s): MOHAMMED M. Fayyadh, R. Kandasamy, RADIAH Mohammed, JAAFAR Abdul Abbas Abbood View Download